Heat Sink Factory CNC Workshop
Many kinds of making process, different production technology and materials, it can provide customers with the best cost-effective products, Of course, stable and mature process is the guarantee of product quality.
Company
The production of heat sink requires CNC machining
Which is a processing method for precision hardware parts. It plays an important role in the production engineering of heat sinks. For example, the bottom plate of the cold plate is generally made of copper or aluminum. It must be processed by precise CNC to process the water channel or hole position, as well as the flatness of the product. Of course, it can also be used. Processing various types of materials, including 316, 304 stainless steel, carbon steel, alloy steel, alloy aluminum, zinc alloy, titanium alloy, copper, iron, plastic, acrylic, POM, UHWM and other raw materials, can be processed into square, round combination Parts with complex structures.
CNC operation processing：
When starting CNC parts processing, the operator should adjust the feed speed to a very small value, perform single-section execution, and concentrate on rapid positioning, knife drop, and knife feeding. direction to ensure safe feed, and then slowly increase the feed speed to a suitable level, and at the same time apply coolant or cold air to the tool and workpiece.
When starting rough machining, it should not be too far away from the control panel. If there is an abnormal phenomenon, stop the machine to check in time. Pull the watch again after opening to make sure that the workpiece is not loose. If so, it is necessary to recalibrate and touch the number. In the process of processing, the processing parameters are continuously optimized to achieve the best processing effect.
After the workpiece is processed, it should be measured whether its main dimension values are consistent with the drawing requirements. If there is any problem, immediately notify the team leader or programmer to check and deal with it. After passing the self-inspection, it can be removed, and it is necessary to send it to the inspector for special inspection.
